Technical parameters & characteristic :
Application:
Packaging & Delivery
Inner packing box
Outer exporting carton
Features:
1.The button of open floor outlet is enough big and it is easy to start
2.Easy to install and disassembly this electrical accessories without need any tools. Furthermore, it is more optional for fast connect wire for terminal block as fast wiring connection.
3. More Strong Scratch Resistance: Surface finish made from stainless steel or Brass by combination of tough material, Aluminum (ADC12) and shot blast finish on the surface achieves high scratch resistance.
4.durable socket receptacle:Using elastic phosphor copper avoids playing spark plug and plug set to bit dead ,ensure high conductivity and more life of pulling and plugging over 15000 times.PC+ABS(1.Modules fireproof : 850 degree C temp.; 2.Modules don't distortion under 102 degree C temp.; 3.Stand under 15 degree C temp) ;Oxygen Insulation & Fire resistance in accordance with UL94 international standard.
5. Long lifetime of push button: Compared to simliar products,more than 5000 times of push button.
6.More soft and slow damping device:The damping speed of our device is 10 times slower than simliar products.Our damping have been patented
7. More heavy duty of bottom boxes:Thickness of bottom boxes body is 1.2mm.
Available for 45*45mm type international sockets or modules types:
HTD-2 Outline drawing:
Installation Guide
1.Swing out from its floor mounted frame thru a spring attached finger level. Outlet bracket is attached to its pop up cover .
2.Remove panel from the bottom box along with the electrical modules.
3.Remove lid surface ,Insert the 10--12mm lead head into the terminal of floor box.
4.Fix the flooring with spare screws on bottom box and place it in embedded hole.
Attentions:
1.Dispose of trash in bottom box and prevent dirt and debris from entering inside.
2.Prevent from corrosive liquid, gas (strong acid, strong alkali, paint)and humidity.
3.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.
4. All dimension quoted are nominal only. Drawings , images and text are for illustrative perposes only and product details and dimension are subject to change without notice.
Safety Warning:
1.This is a class I product and must be earthed
2.This product must be installed/wired by a qualified electrician
3.For indoor use only.
4.For concrete floor.
FAQ:
- Working environment:
- The environment temperature:-5ºC~/40ºC
- The rated voltage:100V~~250V
- Rated current:10A,13A,16A,20A
- Characteristic:
| 1 | Model | HTD-2 | 6 | HS Code | 8536690000 |
| 2 | Brand Name | Safewire or OEM brand | 7 | Market standard | Customized |
| 3 | Type | floor socket | 8 | Place of origin | Zhejiang , Wenzhou, China |
| 4 | Color | Golden, silver | 9 | Frequency | 50Hz~60Hz |
| 5 | Grounding | Standard grounding | 10 | Current Type | AC |
- Technical parameters :
| Serial No. | Parameter | Description |
| 1 | Panel Material | Brass alloy/Alu alloy |
| 2 | Surface finish | Wire drawing/Polishing/Spray painting |
| 3 | Panel Dimension(mm) | 120*120 |
| 4 | Cutout(mm) | 103*103 |
| 5 | Capacity of modules | 3 ways modules |
| 6 | Bracket material | Zinc Alloy & Alu Alloy |
| 7 | Sink box Thickness | 1.2mm |
| 8 | Sink box Material | Steel+Zinc plated |
| 9 | Available modules | 45*45mm or 45*22.5mm |
| 10 | Damping device (DP) | Normal Pop-up & Soft Pop-up available |
| 11 | N.W(kg) | 21.4 |
| 12 | G.W(kg) | 22.4 |
| 13 | Carton size(cm) | 52.5*33.5*33.5 |
Application:
- Office and education
- Industry and Engineering
- Presentation and retail;
- Orientation and safety;
- Transit areas and parking;
- Hotels, hospitality and wellness;
- Health, sport and leisure;
- Art and culture;
Packaging & Delivery
Inner packing box
Outer exporting carton
Features:
1.The button of open floor outlet is enough big and it is easy to start
2.Easy to install and disassembly this electrical accessories without need any tools. Furthermore, it is more optional for fast connect wire for terminal block as fast wiring connection.
3. More Strong Scratch Resistance: Surface finish made from stainless steel or Brass by combination of tough material, Aluminum (ADC12) and shot blast finish on the surface achieves high scratch resistance.
4.durable socket receptacle:Using elastic phosphor copper avoids playing spark plug and plug set to bit dead ,ensure high conductivity and more life of pulling and plugging over 15000 times.PC+ABS(1.Modules fireproof : 850 degree C temp.; 2.Modules don't distortion under 102 degree C temp.; 3.Stand under 15 degree C temp) ;Oxygen Insulation & Fire resistance in accordance with UL94 international standard.
5. Long lifetime of push button: Compared to simliar products,more than 5000 times of push button.
6.More soft and slow damping device:The damping speed of our device is 10 times slower than simliar products.Our damping have been patented
7. More heavy duty of bottom boxes:Thickness of bottom boxes body is 1.2mm.
Available for 45*45mm type international sockets or modules types:
HTD-2 Outline drawing:
Installation Guide
1.Swing out from its floor mounted frame thru a spring attached finger level. Outlet bracket is attached to its pop up cover .
2.Remove panel from the bottom box along with the electrical modules.
3.Remove lid surface ,Insert the 10--12mm lead head into the terminal of floor box.
4.Fix the flooring with spare screws on bottom box and place it in embedded hole.
Attentions:
1.Dispose of trash in bottom box and prevent dirt and debris from entering inside.
2.Prevent from corrosive liquid, gas (strong acid, strong alkali, paint)and humidity.
3.When installing, pay attention to the opening direction,the length of the conductor to the bottom box shall not exceed 10cm,Set aside at least 200mm of cable.
4. All dimension quoted are nominal only. Drawings , images and text are for illustrative perposes only and product details and dimension are subject to change without notice.
Safety Warning:
1.This is a class I product and must be earthed
2.This product must be installed/wired by a qualified electrician
3.For indoor use only.
4.For concrete floor.
FAQ:
| Q:Do you have literature we can have? |
| A:Of course, we can post out a brochure or you can download it along with data sheets direct from here |
| Q:Do you manufacture all products yourself? |
| A:We manufacture all of our core product ranges ourselves as a proud best China manufacturer. A small number of our ancillary products are brought in from trusted partners also mainly China based.! |
| Q:Do all of your products comply to National standards? |
| A:Our products meet China National standard ,IEC standard and the relevant national standards such as SASO |
| Q:What lead times do you offer? |
| A: Lead time is dependent on many factors including type of unit and quantity required. We stock an extensive range of core product in a number of sizes that can be available 14 working days.Lead time indications are stated on quotations, but by all means feel free to ask for up to date information. |
| Q:Can I request a specific delivery time/day? |
| A:Safewire will always endeavour to meet our customer's requirements and hit special delivery times every day |
| Q:Can I request a technical specification? |
| A:Please contact us to request a technical specification or product certification. |
| Q:How long is the warranty on your products? |
| A:There is a 12 month warranty from date of delivery. In the event of any failure, items must be returned to Safewire for full investigation. |
| Q:What is your products installation? |
| A:There are various methods of fixing for each unit - a member of the quotes team can talk you through the options or you can view them on the website. |
| Q:Can you send me a price list? |
| A:As there are so many variations of specification possible for each unit - We can send you brochure or you can download it from the website. Please contact the Quotes Team direct for pricing. |
| Q:How much will it cost? |
| A:This will vary on the unit and the specification of the unit, please either call a member of the quotes team or complete the online form. |
| Q:Can I request a sales visit or a visit to your factory? |
| A:Please contact us to request a visit from us or to our Head Office address: No.152 Xinggua Road, Xinggua industry zone, Liushi town, Yueqing, Wenzhou,China ,325604; |
| Q:Can I request a sample from Safewire? |
| A:Safewire are happy to supply sample to our partners, please contact us directly to discuss your request. |
| Q:Can I request sales and marketing material? |
| A:Safewire are continually investing in their sales and marketing material, please contact us directly to discuss your requirements. |
| Q:How long make a sample? |
| A: Within 7 working days upon receipt of confirmed order and payment for standard product. Customization product order should be confirmed between us. |