Dual-port 4.2A USB power socket for mobile phones and iPads

USB Characteristic:Serial No.ParameterDescription1Panel MaterialPC 94-V02Inside materialTin phosphorous bronze3Surface finishGlossy4USB DC output4.2A/5V5Output voltage tolerance±5%6Output powerMax.21W7Service life in hours3000h 21W8Efficiency78%9No-load power consumptionMax 0.2W10Input voltage100~240v/AC 50~60Hz

Featured Products

USB Characteristic:
Serial No.ParameterDescription
1Panel MaterialPC 94-V0
2Inside materialTin phosphorous bronze
3Surface finishGlossy
4USB DC output4.2A/5V
5Output voltage tolerance±5%
6Output powerMax.21W
7Service life in hours3000h 21W
8Efficiency78%
9No-load power consumptionMax 0.2W
10Input voltage100~240v/AC 50~60Hz
11ColorWhite RAL9003 Black
12Number of terminals2 screw terminals
13Electrical insulation classClass II
14IK degree of protectionIK04
15IP degree of protectionIP21
16Dimension of product45*45mm

Environmental requirements
Serial No.ParameterDescription
1Operating temperature-10ºC~+40ºC;Operating
2humidity20%~90% RH
3Storage temperature-20ºC~+85ºC;storage
4humidity10%~95% RH
5Resistance to pressure≥3Kv/AC 1min
6Isolation resistance500v DC/100MΩ

Application:
Dual Port 4.2A USB Power Socket for Phone, iPad
Feature :
Dual Port 4.2A USB Power Socket for Phone, iPad
1).Dual port USB charger of 4.2A 5VDC;
2). Protection type: Short time short-circuit protection;
3).With identifying chip: can automatically recognize different mobiles and suit its request charging AMP to meet the charging speed;
4) Product be certificated by CE,IEC60950 FOR LVD and IEC55024,IEC61000 for EMC;
5). All materials be ROHS directive tested
 
Testing ItemTesting StandardTesting Data
Aging testUSB charger for 2 hours with LED lights must always light2 hours
 High and low pressure 90V-264V to normal operation90V-264V normal
Power testRated output voltage range: no-load: 5V±5%, load:5V±5%No-load: 4.92-4.95V, load: 5.04-5.1
 Rated output current5.0V
 Output ripple: load 1A/2.1A, Vpp<200mV117mV-146mV
 Short circuit protection: output positive and negative short for 2 minutes, after the break to work properly2 minutes
 Pin output voltage: D-: 2.75VDC/D+:2VDC, subject to actual test valueD-:2.77V/D+:2.763V
Pressure testUnder normal climatic conditions, the input and output terminals should withstand the corresponding voltage(USB-10, 101 series for the 1500V, the other is more than 3000V), Generally every test a minute without breakdown flashing phenomenon was qualified, and leakage≤5mA.3000V
0.68mA-0.69mA
Insulation resistance testIn the normal temperature environment, AC input plug and DC input plug between the input DC500V, 1 minute after the insulation resistance of 7 trillion or more
Grounding resistanceIn any case the resistance shall not exceed 100mΩ 
Temperature rise testAt room temperature 30ºCrated work, the charger rated for 2 h after the measurement of its shell surface temperature change <1ºC/ h that the temperature is stable, this time measuring the surface temperature of its shell <50ºCPass
Limit loadTest the product load current limit can run the load valuepass

Package:10 Pcs inner box into a master carton.Poly bag with box packing.
Dual Port 4.2A USB Power Socket for Phone, iPad
Dual Port 4.2A USB Power Socket for Phone, iPad


Dual Port 4.2A USB Power Socket for Phone, iPad
4.Safety Warning:
1.For indoor use only.
2.This product must be installed/wired by a qualified electrician.

  5.Attentions:
1.Protect children from touch skirt of USB port.
2.Ensure current and voltage as rating current/voltage .Do not overload
3.Prevent from corrosive liquid, gas (strong acid, strong alkali, paint)and humidity.

Company introduction
This is Safewire Electrical by Feilifu which is 20+ year-experienced OEM manufacturer of Floor boxes & Sockets for most global brand in China, granted by ISO9001, ISO14001 and OHSAS18001 system with products certified by TUV, Germany.
Dual Port 4.2A USB Power Socket for Phone, iPad
Dual Port 4.2A USB Power Socket for Phone, iPad
Dual Port 4.2A USB Power Socket for Phone, iPad
Dual Port 4.2A USB Power Socket for Phone, iPad
FAQ:
1.Do all of your products comply to National standards?
Our products meet China National standard ,IEC standard and the relevant national standards such as SASO.

2.Do you do specials?
We continuously hold capacity in our manufacturing & fabrication facilities to offer market leading flexibility on specials or bespoke socket and wiring management systems

3.What lead times do you offer?
Lead time is dependent on many factors including type of unit and quantity required. We stock an extensive range of core product in a number of sizes that can be available 14 working days.Lead time indications are stated on quotations, but by all means feel free to ask for up to date information.

4.Can I request a specific delivery time/day?
Safewire will always endeavour to meet our customer's requirements and hit special delivery times every day.

5.How long is the warranty on your products.
There is a 12 month warranty from date of delivery.  In the event of any failure, items must be returned to Safewire for full investigation.

6.Can I request a sample from Safewire?
Safewire are happy to supply sample to our partners, please contact us directly to discuss your request.

7.Can I request sales and marketing material?
Safewire are continually investing in their sales and marketing material, please contact us directly to discuss your requirements.

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours